Krita Sprint 2019

So, we had a Krita sprint last week, a gathering of contributors of Krita. I’ve been at all sprints since 2015, which was roughly the year I became a Krita contributor. This is in part because I don’t have to go abroad, but also because I tend to do a lot of administrative side things.

This sprint was interesting in that it was an attempt to have more if not as much artists as developers there. The idea being that the previous sprint was very much focused on bugfixing and getting new contributors familiar with the code base(we fixed 40 bugs back then), this sprint would be more about investigating workflow issues, figuring out future goals, and general non-technical things like how to help people, how to engage people, how to make people feel part of the community.

Unfortunately, it seems I am not really built for sprints. I was already somewhat tired when I arrived, and was eventually only able to do half days most of the time because there were just too many people …

So, what did I do this sprint?

Continue reading “Krita Sprint 2019”

Making crochet animation in Krita and Kdenlive

I’ve only recently become anywhere decent at crochet. The issue was that whenever I would try to learn how to do crochet from a book, the instructions were always incredibly vague. So I really wanted to do some animations that show how a given stitch is done, without too much noise surrounding it…

I’ve only recently become anywhere decent at crochet. That is, making fabric stuff from yarn with a crochet needle. My stepmother taught me how to do the basic slipknot and chain stitch in finger crochet when I was a little girl, but my attempts at getting any better at it failed for the longest time.

The issue was that whenever I would try to learn how to do crochet from a book, the instructions were always incredibly vague. To the point that when I finally learned a stitch beyond the chain stitch, it was not the single/double stitch I was trying to learn, but instead ended up being a sort of weird slip stitch that lead to a very stretchy fabric resembling knitted work rather than crochet.

Videos on the other hand tend to have a little bit too much information going on for me. Like the tutor’s voice, anything wrong with the video lighting wise, any blurriness.

So I really wanted to do some animations that show how a given stitch is done, without too much noise surrounding it.

First, I made a sketch in Krita at 1600×900 pixels. The sketch is super rough as you can see. The idea is to get the motion down first.

I then cleaned it up a little and started playing with aspect ratios.

Here’s one that’s more zoomed in, giving more attention to the actual important part of the image. I do feel that this decreased the sense of how the hands move, which is why I decided against using this one for the final animation.

Another option was a square ratio that was super-zoomed in. This was somewhat inspired by the gifsets on tumblr and cooking videos.

And then shared that on mastodon.art, as I had done when I made a turntable of Kiki:

The general feedback was that the square images were nicest for actually getting the stitch. Because of my worries about the hands, I ended up deciding to continue with the full view version, and make smaller square ones for social media. The idea being that the full version can be viewed full screen and the stitch should be easy to read then.

The Second Day

I spend the second day firstly, building Krita with Address Sanitizer enabled, so that I could catch memory related bugs. The Address Sanitizer allows me to find bugs, in particular we’ve been implementing a lockless hashmap for Krita’s canvas tiles, and this could have some scary bugs that the address sanitizer might be able to find. Basically, the Address Sanitizer will crash as soon as it finds a memory-related bug.

I didn’t find hashmap bugs, but I did find the following bugs:

As well as several other bugs. The big downside to the Address Sanitizer(and GDB as well, really) is that Krita will take up twice as much ram, which was a little bit of an issue, as discussed later.

When animating, I spend more time looking at my hands and the motion I did, and I noticed that I was missing the almost natural first step of making a loop with my fingers. So I added that. I also tried to make the hand motion at the end a little more natural, letting the yarn hand pull at the knot as well.

There’s also pauses now, letting people identify the separate steps, and I colored the thread red.

The feedback I got on mastodon was that the pauses helped a surprising lot. The other feedback I got was that it was still hard to tell what was going on with twisting the loop or the pulling of the yarn into a knot at the end. I decided then that I should add text, as well as try to make the animation smoother so the motion is easier to follow.

Third day.

So, then I started inking the image. I first decided to increase the size from 1600 × 900 to 3840 × 2160, which is the 4k definition. The idea being that if I got it that high res, then I wouldn’t have to worry about the inking lines looking awful. You see, video codecs tend to be optimized for gradients and smooth areas, so images with a lot of contrast, such as traditional raster animation tend to be disadvantaged when converted to video. Having a high resolution offsets this issue as well as other compression errors.

I also doubled the frame count to smoothen it out. The thumbs and rest of the hand are separated. For the crochet needle I made one basic frame and then copied and rotated it all over the place. This part, as well as the hook hand made me wish for tweening on transformation masks, but that’s something that requires a smarter person than me to finish it.

At the end, I tried colouring the hands so it wouldn’t be a mess of lines. I ended up with too much ram usage, so I tried to reduce my ram usage by reducing the layer type or color space used. After all, the line art didn’t need to have 4 channels when all it needed was alpha, so I converted those to greyscale. This had the side effect of turning the onion skins grey too… I also tried using animated fill layers for the hands, but it seemed that upon playback there was a single frame lag for the fill layers but nothing else, which was a bit of a letdown.

So the following bugs were filed…

Eventually I scaled the canvas down to 3200 × 1600, which is still quite huge, but at these sizes it made a full gig of difference. Anyway, at the end of the day, I had this:

The hands were easier than it looks, as with the turning motion I was able to use my knowledge on orthographic projection to gauge the proportions.

The turntable of Kiki, the Krita mascot was a previous animation project I did which allowed me to practice my knowledge of orthographic projection, which I then could reuse for the hands here.

And the next day, I also animated the yarn, coloured everything, and used transparency masks to ensure that the needle and yarn were masked at the correct moments. There’s a little bit of stretch and squash happening on the yarn in the pulling moment that I hope really sells the motion.

The final animation as screenshotted in Krita. The file is 2.2 gib, my ram and swap(8gib and 4gib respectively) are almost full. The blue frames are the inbetweens and frames that only contain color. The yellow, purple, green and orange frames represent the different steps. The red frames are frames that are the most extreme of a motion. I can’t tell left from right without thinking, so I just named the two hands the yarn and hook hand 🙂

Editing the video

Because Krita was having so much trouble, and I still wanted to add text, I decided to finish this in KDENLive. I couldn’t get anything rendered from Krita’s side even, because I had earlier that week installed earlyoom to prevent my whole desktop locking up indefinitely as it is wont to do due to me doing a little bit too much with my computer. So I basically had to render the frames, but then Krita refused to render the frames and gave no feedback why, but I suspect it was because of running out of memory. So what I did was I just tried to render out frames, and then when Krita errored out, rendering again, but then starting from the last frame Krita rendered. This is sort of what that feature was designed for.

I brought the animation into KDENLive. I Have KDENLive 18.12.3 on this device.

KDENLive, while it can import frame sequences doesn’t seem to like them much. It didn’t allow smooth playback for them, filter effects didn’t seem to work(I wanted to get the animation slowed down to have it playback at 16 fps instead of 24), nor did it have a menu option to transcode. So I had to go into the commandline and convert the different steps into mp4s. When using the log docker or a terminal, Krita will spit out the ffmpeg commandline entry into it before rendering, so I could copy-paste that and use it as a base.

KDENLive also had some other issues, like an issue where it would just kinda, ‘error’ when resizing clips or moving them around, complete with error noise. Afterwards it would refuse to do anything until I restarted it. Another issue was that there was this ‘ghost’ clip somewhere that didn’t show up in the timeline, but it was affecting the render, making it a 19sec animation instead of 11. I had to work around it by defining a zone and only rendering that. Then, later, KDENLive upon startup would just randomly have said clip appear. The final issue is that sometimes when playing back, KDENLive will just have a memory spike or will slowly consume all memory meaning that I couldn’t preview the animation correctly, as earlyoom would kick in and kill KDENLive.

Adding the text was painless, however, and KDENLive’s list of render settings are a blessing. So I rendered the file to webm, and uploaded it.

Of course, 10 hours afterwards, someone goes: ‘well, that last step is too short’. The reason the last step feels too short is because the text for it is too long. If I hadn’t put in any text, this wouldn’t have been an issue. I did this again this morning(that’s a full day afterwards) because someone else had the same issue, and I suspect that each time a line ends there’s a significant lag while our eyes do a ‘carriage return’, so that’s something that ought to be taken into account.

Webvtt

Because I am dyslexic, and also Dutch(we’re a little language obsessed in the Netherlands), I value captions and subtitles a lot, and try to always make them for my videos.

Webvtt is the official webfriendly format, but the typical subtitle creation software like Aegissub don’t support it. So to test this, I made a very simple html file with a reference to a webvtt file:

<html>
  <head>
    <title></title>
  </head>
  <body>
    <video controls width="800">
    <source src='crochet_slipknot.webm' type='video/webm'>
		<track label="English subtitles" kind="subtitles" srclang="en" src="crochet_slipknot_subtitles.vtt" default />
    </video>
  </body>
</html>

I then made that file, using KDENLive as a reference to determine the timings. KDENLive’s timestamps go mm:ss:frames instead of hh:mm:ss:miliss, this was a little bit of a surprise.

WEBVTT

REGION
id:title
width:24%
lines:1
regionanchor:0%,0%
viewportanchor:6%,9%

REGION
id:instructions
width:24%
lines:5
regionanchor:0%,0%
viewportanchor:6%,57%

STYLE
::cue {
   background-color:#ddd49f;
   color:black;
}

STYLE
::cue-region(instructions) {
  align:left;
  color:black;
}

STYLE
::cue-region(title) {
  font-size:200%;
}

00:00:00.000 --> 00:00:03.125 region:title
Crochet
Slipknot

00:00:03.125 --> 00:00:05.333 region:instructions
Step 1:
Make a loop between your fingers.

00:00:05.333 --> 00:00:06.625 region:instructions
Step 2:
Put your hook through the loop.

00:00:06.625 --> 00:08.625 region:instructions
Step 3:
Turn your hook so the loop will twist.

00:00:08.625 --> 00:00:12.375 region:instructions
Step 4:
Now push the hook down and pull up the yarn through the twisted loop.

00:00:12.375 --> 00:00:15.000 region:instructions
Done!
You're ready to start your project.

You can then open the html file in Firefox, and it’ll allow you to select the subtitle track for preview. Firefox despite everything still doesn’t support styling in webvtt files, which is kinda annoying. Chromium also didn’t. VideoLan does support styling, but video lan’s then doesn’t support alignment of the text, which is a little weird.

All of them, however, support regions, which is more than I expected, to be honest… Sadly, peertube, where I uploaded the video to, has a player which does not support regions.

But none the less, here’s the final result:

The final video.

And the square ones of each step:

I made these in Krita eventually, because I couldn’t figure out how to get KDENLive make me a 1:1 project. It was just a case of importing the frames and cropping them and then copy-pasting the layers containing the title.

While doing this I noticed I had masked out the crochet needle in the last step incorrectly so it showed the needle always in front of the yarn instead of briefly behind it to indicate a turn…

Step 1: Make a loop between your fingers.
Step 2: Put your hook through the loop.
Step 3: Turn your hook so the loop will twist.
Step 4: Now push the hook down and pull up the yarn through the twisted loop.

Afterthoughts

Generally, while animating was fun, I always just kinda… lose all motivation when having to deal with the video editing part.

Video editing mistakes tend to haunt me more than anything, and I am not sure why. Maybe it is because my videos actually get comments unlike my writing and my art. Maybe it is because having to fix a mistake in a video, unlike writing, always leads to having to open the video editor, deal with potential bugs, and then you always have to delete the previous video, copy over all your comments, reupload the video, and then have to anticipate the next set of people going ‘oh, hey there’s this mistake over here’ and I have to delete the video, open up the editor, deal with the editors bugginess as I fix the issue, rerender the video, reupload it, just so I can wait for the next set of comment that…

And I also just kind of have the feeling that because I am an experienced artist and have a good sense of rhythm, I am cursed with the ability to see all the ways in which the video is wrong, but not the experience to fix it with confidence.

Other than that, I would like to share the source files for this one, but the issue is that git isn’t very binary-files friendly(which all video and image files are, as far as git cares), so I am not sure how to go about sharing the source files. In total, I think I ended up about 15~ hours on this, of which 10 were the actual animation.

I do kind of want to continue animating these stitches, but there will be a little bit of a pause in between, I think. Hopefully the reported bugs and address sanitizer backtraces mean that others who animate in Krita will have a smoother experience, but I think people will always have to watch their ram usage.

Poking at Peruse

So, I got my thesis done, updated the Comic Project Management Tools, and had a lot of time left till I got my thesis results(I did not pass >_> sadly). One thing that was sort of bugging me was that after all the work I did on the CPMT, there just wasn’t much movement happening in Peruse, the KDE comic book reader that can read comic books with ACBF files and make use of the extra functionality.

So, it was time to do some moving myself.

Continue reading “Poking at Peruse”

Comic Management: Improving the other exporters.

After finally having dealt with school, I wanted to spend some time on getting the other comics exporters up to snuff, after getting the ACBF exporter so far as I did.

This was partially motivated by me finding some extra information on ComicBookInfo and ComicInfo.xml, as well as discovering that both main catalogueing software that used either(ComicBookLovers and ComicBookRack respectively) are dead. Callibre, as to be expected, acknowledges neither these or CoMet or ACBF as metadata files, though there is a plugin that supports the ComicBookInfo json and the ComicInfo.xml files (Ideally someone would add CoMet and ACBF to that, but I am not really interested in installing the monster that is Callibre on my device right now).

I just went and modified the exporters for these two files so they’d be a bit more correct and left it at that. But, that leaves one more exporter…

Continue reading “Comic Management: Improving the other exporters.”

More comics management: making proper ACBF files.

Krita 4.1’s comic project management tools now support 90% of all ACBF features.

Missing are still: Transparent(text-area), Text-rotation, Jump, and Anchor.

Best of all, I managed to get most of the values understood semi automatically.

Continue reading “More comics management: making proper ACBF files.”

Writing a comics manager for Krita

Those who know me, or at the least know my history with Krita is that one of the prime things I personally want to use Krita for is making comics. So back in the day one of the things I did was make a big forum post discussing the different parts of making a comic and how different software solves it.

One of the things about making a comic is that is a project. Meaning, it is big and unwieldy, with multiple files and multiple disciplines. You need to be able to write, to draw, to ink, to color. And you need to be able to do this consistently.

The big thing I was missing in Krita was the ability to quickly get to my selection of pages. In real life, I can lay down pages next to one another, and always have them in my minds eye. In Krita, getting the next or previous page is always a matter of digging through folders and finding the correct page number.

Adding to this, I am also a bit of a perfectionist, so I have been training myself to start drawing scenes or writing as soon as I have an idea, because any idea is way more useful when you’ve got it down on page. You can append it to an existing story, or just work it in and reuse the drawings and compositions. And this was also a bit difficult to do, because how does one organise and tag those ideas?

So hence I spend the last few weeks on writing a comics manager for Krita.

Continue reading “Writing a comics manager for Krita”

Pre-GSoC work: Researching color deficiencies.

So, while the 2016 Google Summer of Code hasn’t officially started yet, and Krita’s master is in feature freeze till the release at the end of the month, it’s a good moment to start preparing.

My area of specialisation within Krita is Colour Management, and my project is focusing on softproofing. This area is one that isn’t difficult in regards mastering intricate c++ methods, but rather an area that focuses on research. In other words, figuring out what is actually true.

It’s not quite certain why there is so much misinformation out there, a simple suggestion would be to say that perhaps a lot of colour management UI is just too byzantine to understand. But on the other hand, Western Society in general has had no single Colour Theory survive longer than a century until a new one showed up. So perhaps there’s just something about colour, and especially about how relative human vision is, that makes it difficult to capture in a single coherent theory, and most artists just develop a sense for color than a cohesive method.

My focus is on the softproofing, a sort of on-the-fly filter to emulate how an image will look when being printed(and more importantly, which details could get lost). I already researched this back in February, LCMS’s API will allow for it easily, and I now mostly need to sit down with Boudewijn to stare at Krita’s architecture to decide what is possible before deciding upon a UI and implementation.

However, in a discussion on IRC it was mentioned that it’d be nice if we could emulate not just cmyk profiles, but also things like colour blindess.

Continue reading “Pre-GSoC work: Researching color deficiencies.”

Little update

So, I did two important things recently.

First, I posted my 101 sketches I made with Krita since I started working on it. I made a google+ album out of it, because I didn’t think this server could hanle 101 sketches easily.

Secondly, I formally open sourced my little SVG comic reader with GPL 3.0 (which I think is sensible for a web-application.) You can find it on github here: https://github.com/therahedwig/SVG-comic-reader

I actually made it 2.5 years ago, but I never formally open sourced it, more forgot about it, actually. When at the Krita sprint, Boudewijn remarked he really disliked  the way how webcomics present themselves, I remembered it again and show it to him and Timothée Giet. Timothée, as a comics creator was interested in using it, and I finally took the step to open source it.

It has quite a few features, so check out the readme at github.

(GSoC 2015) Merged in color space picking GUI.

So, after the Tangent Normal Brush was merged, Krita didn’t have any new releases because it was decided to do some major bugfixing. Which in turn means I haven’t had any bugreports yet.

That meant that for the rest of my GSoC, I instead worked on a secondary project: An improved GUI/Widget for picking profiles in Krita, which I merged today.

Continue reading “(GSoC 2015) Merged in color space picking GUI.”